Pro Intercom BP2B Two Circuit Intercom Beltpack with Dual Output

The BP2B is essentially the same as the BP2 except that it has two earspeaker amplifiers and a 5-pin headset XLR on the rear. Used with a dual-muff headset the operator can monitor circuit A in one earspeaker and circuit B in the other. The microphone speaks to both circuits.

The BP2 puts 2 of the popular BP1s in the same enclosure. The A and B circuits operate independently of one another and may be used simultaneously. Only the headset amplifier is shared so that both circuits can be monitored on a single-muff headset. As you can see from the photograph, each circuit has its own volume control, signal button, signal lamp, mic on/off switch and sidetone control. The 2 circuits are connected to the rear panel XLRs so a Y-cable or SB1 Splitter Box is necessary for each circuit if you wish to loop through to the next station in that circuit.

The BP2B is plug-in compatible with Clear-Com® and other popular 200W unbalanced headset intercom systems.