Zaxcom TRXLTS3.6 Stereo Wireless Bodypack Transmitter

Rs. 2,075.00

The “S” model is a stereo version of the LT3. The “S” model takes two lavaliere microphones into the single 3-pin LEMO connector. A stereo image is then wirelessly transmitted opening up unlimited possibilities for the enhancement of audio on programming delivered in 5.1 surround format.

***The Stereo version of the LT3 does NOT have NeverClip™ / No ZHD in Stereo Mode***

The TRXLT3 is a wide-band transmitter featuring the new Zaxcom High Density (ZHD) Modulation. ZHD Modulation allows up to 10 channels of wireless to be operated in only 1 MHz of spectrum space. Channel spacing will vary based on the receiver you pair it with. The wireless signal is only 50 KHz wide and can be spaced as close as 100 KHz channel to channel allowing up to sixty channels of ZHD wireless in a single 6 MHz American television channel. The new modulation is ultra efficient resulting in incredible transmission range. The ZHD transmitters are capable of running all existing mono Zaxcom modulations maintaining compatibility with all currently produced Zaxcom receivers. ZHD modulation conforms to all currently proposed FCC regulations for spectrally efficient wireless transmission.

The TRXLT3.5 covers blocks 20 through 23 (512-614MHz) and the TRXLA3.6 covers blocks 23 through 26 (596 – 698 MHz). It’s lightweight and durable, housed in a high strength, impact resistant nylon polymer casing.

Features:

CLUTTER FREE WITH ZHD
Ultra small spectral footprint of 50kHz that can be spaced as close together as 100KHz
POWER RANGER
The most efficient modulation clears the way for even more transmission distance than ever before
BELLS & WHISTLES
Wide-band transmitter with built-in recording that's RF remote controllable - what more could you ask for?
DIGITAL MODULATION
100% digital modulation for superior audio quality
ENCRYPTED AUDIO
keeps transmitted audio private
INTERMODULATION RESISTANT
removes unwanted spurious emissions for a cleaner signal
INTERNAL BACKUP RECORDING
capture quality back-up audio even in the most hostile RF environment
INTERNAL RECORDING
records timecoded audio files
MARF
highly reliable lossless recording format
NEVERCLIP
gives you an incredible dynamic range without clipping your audio
TIMECODE
built-in timecode reader and generator
ZAXNET
provides wireless timecode, ZaxNet audio and remote control between Zaxcom products
ZAXNET QC AUDIO
quality control confidence monitoring without returning to your cart
ZHD MODULATION
a 50 KHz wide signal spaced as close as 100 KHz apart with outstanding transmission distance

A bit about spacing…
•The LT3 paired with any Zaxcom wireless receivers in Mono or XR Modes can be spaced as close as 400 KHz channel to channel
•The LT3 paired with any Zaxcom QRX235, QRX200 or QRX212 in ZHD mode can be spaced as close as 200 KHz channel to channel (300 KHz recommended)
•The LT3 paired with the upcoming QRX335, QRX300 or QRX312 in ZHD mode can be spaced as close as 100 KHz channel to channel

The LT3 works with ZaxNet, Zaxcom’s 2.4-GHz RF network that distributes remote control commands, timecode and IFB audio. With ZaxNet, one can remotely control transmitter settings such as gain, frequency channel selection, transport controls and output power levels. When paired with an IFB100/200 and Deva or Fusion the units can also replay audio via a timecode reference giving production sound mixers the ability to replay and remix audio, creating a virtual multi-track playback and re-record system.

The LT3 also sends a Quality Control audio signal over ZaxNet so when micing someone you don’t have to go to the cart to hear how it sounds. Now you can use an ERX to listen to the mic right on the spot.