{"product_id":"royer-sf-2-active-ribbon-microphone-matched-pair","title":"Royer SF-2 Active Ribbon Microphone Matched Pair","description":"\u003cp\u003eThe SF-2 ribbon microphone is a phantom powered version of the original SF-1 ribbon microphone. Designed primarily for classical applications and acoustic instruments, the SF-2 combines high-quality audio performance with our exclusive active electronics for ribbon microphones. The SF-2's output of -38 dB puts its sensitivity on par with that of phantom powered condenser microphones, allowing it to be used with a wide variety of mic pre's regardless of gain characteristics. The unique electronics and custom designed FET's used in the SF-2 deliver ultra-quiet operation, with self-noise of lower than 18 dB.\u003c\/p\u003e \u003cp\u003eThe SF-2's magnet\/pole piece transducer structure gives a wide, uniform frequency response with no substantial peaks or dips, and the 1.8-micron ribbon element delivers superb transient response. Frequency response is excellent regardless of the angle of sound striking the ribbon and off-axis coloration is negligible.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePhantom powered circuitry provides high output and impedance matching\u003c\/li\u003e \u003cli\u003eHigh SPL capabilities (130 dB @ 70 Hz)\u003c\/li\u003e \u003cli\u003eNo distortion up to maximum SPL rating\u003c\/li\u003e \u003cli\u003eExtremely low residual noise\u003c\/li\u003e \u003cli\u003eRibbon element not affected by heat or humidity\u003c\/li\u003e \u003cli\u003eAbsence of high frequency phase distortion.\u003c\/li\u003e \u003cli\u003eEqual sensitivity from front and back of microphone\u003c\/li\u003e \u003cli\u003eConsistent frequency response regardless of distance\u003c\/li\u003e \u003cli\u003eHigh efficiency toroidal transformer and gold plated output connector\u003c\/li\u003e \u003cli\u003eVery low magnetic leakage\u003c\/li\u003e \u003cli\u003eMatte Black finish reduces reflected light for live and on-camera use\u003c\/li\u003e \u003c\/ul\u003e \r\n\u003cbr\u003e \r\n\u003cp\u003e\u003cstrong\u003eGain\u003c\/strong\u003e\u003cbr\u003e \r\nActive Series ribbon mics are as sensitive as phantom powered condenser microphones, allowing you to use virtually any mic preamplifier or board pre. Conventional ribbon microphones are 15 to 30 dB less sensitive than condenser mics, necessitating the use of high-quality, high-gain microphone preamplifiers when recording quieter sound sources like acoustic instruments, vocals, room ambiance, etc. The SF-2 contains a fully balanced, discrete head amplifier system which utilizes a specially wound toroidal transformer and ultra-low noise FET's to deliver a sensitivity of -38 dB. Even with extremely quiet sound sources, you'll have enough level to drive any recording medium.\u003c\/p\u003e \r\n\u003cp\u003eThe SF-2's electronics create no additional self-noise. All of the SF-2's higher output comes from its large, specially wound toroidal transformer which provides an additional 14 dB of 'free gain.' The phantom powered system operates at less than unity, adding no noise of its own.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eImpedance Matching\u003c\/strong\u003e\u003cbr\u003e \r\nThe electronics in the SF-2 provide a perfect load to the ribbon element at all times, allowing the microphone to deliver 100% of its full sonic potential regardless of the input characteristics of the following mic-pre. Due to its low-impedance output, SF-2's can be used on extremely long cable runs with minimal signal loss.\u003c\/p\u003e \r\n\u003cp\u003eA proper impedance match is critical to the performance of ribbon microphones. Impedance mismatching loads a ribbon element improperly, resulting in loss of low end and body, lower sensitivity, and an overall diminished performance. With Active Series ribbon mics, the ribbon element sees a perfect impedance at all times regardless of the preamp you choose, so its performance is never compromised by the effects of improper loading. In addition, the ribbon element cannot be damaged by phantom power, electrical glitches or miswired cables.\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003eThe SF-2 Story\u003c\/strong\u003e\u003cbr\u003e \r\nTwenty prototype SF-2's circulated in major studios and scoring stages for years before the microphone's release. They were extremely well received in classical circles, where they excel on choir, piano, woodwinds, strings and many other applications. They were also well received in studios focusing more on acoustic instruments, singer\/songwriters, etc. Royer couldn't get most of the prototypes back...\u003c\/p\u003e \r\n\u003cp\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003cbr\u003e \r\nThe SF-2 ships in an aluminum presentation case with an SFS-2 shock mount, mic sock, documentation and manual.\u003c\/p\u003e \r\n\u003cp\u003eThe optional SF-2 Deluxe packaging includes a beautiful Padauk wood presentation case, a Royer-made 20' microphone cable, a premium RSM-24 shock mount, documentation and manual, all packaged in an aluminum carrying\/storage case.\u003c\/p\u003e","brand":"Royer","offers":[{"title":"Default Title","offer_id":48415040788,"sku":"711668","price":4665.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1203\/4576\/products\/64ddd9b9e2d7dac4c7c2791925526da0.jpg?v=1502895384","url":"https:\/\/sg-2111.myshopify.com\/products\/royer-sf-2-active-ribbon-microphone-matched-pair","provider":"SG_2111","version":"1.0","type":"link"}